NANOPROTECH Marine

PROTECT YOUR MARINE WITH NANOPROTECH ANTICOR

PURPOSE:

the product is unique in complete displacement of any type of moisture (dampness, humidity, fog, rain, acid rain, chlorinated water, salt water etc.). It is a powerful anticorrosion protection from any kind of aggressive action over an extended period of time. An invisible nanocoating protects external and internal surfaces of boats, sailboats, jet skis and many more from corrosion for at least 1 year. The product significantly prolongs the life of marine equipment.

Lubricates at a temperature from -112F to +284F

Penetrates into Hard-to-reach spots

Powerful Anticorrosion protection

prolong the life of metal parts

protects external & internal surfaces

Waterprotection

PROPERTIES:

the product provides long-life anticorrosion protection of metals from any kind of moisture. The spray has high adhesion to metals and other materials. Nanoparticles penetrate into a structure of the applied surface, displace moisture, remove oxides, and prevent corrosion. The product does not lose its properties at the temperature range from - 112°F to +320°F. It is harmless on all materials and can penetrate into hard-to-reach spots. The product can be applied on wet surfaces. The spray maintains its elasticity for a long time. 

Types of equipment

that can be used by product

Wiped down the grommets and windshield frame on my ‘56 wooden Chris craft last month with Marine Anticor and haven’t had to touchup any of those spots since. Now after I fix the engine after my neighbor crossed in front of me dragging a ski rope I’ll be able to test out the finish with some good ole sea spray. 

Jerry K.

I have a small kayak that I have to replace the seat fasteners on every couple of months from saltwater damage. I sprayed Marine Anticor and haven’t had a problem yet. 

Asia W. Reidsville, NC
  • Long-life protection from corrosion
  • High Penetrating power
  • Instant effect
  • Does not dissolve in water
  • Prevents corrosion 
  • No need for a pretreatment of metals

Product Life Span: 1 year or more after application if product is used under normal circumstances.

Composition: highly refined mineral oil, anticorrosion additives, antioxidants, dearomatized paraffin, and naphthene hydrocarbons, NANOPROTECH formula, propane, butane.

Developed on the basis of advanced nanotechnologies.

NANOPROTECH ANTICOR PERFORMANCE TEST:

The Steel Coupons were subjected to salt fog exposure in accordance with the RTCA/DO-160G, Section 14.3.6.7, Category T, Severe Salt Fog test. The test hardware was exposed to forty-eight (48) hours of salt fog followed by a twenty-four (24) hour dry out, and then repeated once more. A visual examination of the test hardware after application of the salt fog environment revealed varying degrees of corrosion on some of the coupons. The test hardware was returned to the customer for evaluation following test completion.

Test conditions:

  • t = - 31 F,
  • Test objects were continiously sprayed with 5% sodium chloride solution, saline solution.

Metal coupons treated with different kinds of anti corrosion products
zigma spray 500
Wurth saBesto Corrosion protection spray 300ml
Dintrol 485 rig coat 500ml
s doc 100 corrosion protectant 300ml
3-in-one original multi purpose oil spray (from wd40) 200ML
acf-50 369ml (lear cemical)
wd-40 450ml
3m scotch 1601 400ml
castrol chain lube racing 400ml
corrosion block (lear Chemical) 118ml
halfords zinc Primer rust resistant coating 300ml
nanoprotech

Application areas: steel rigging, propeller, anchor roller, anchor,  hatches, metal cables, boat ladders, flanges and all threaded connections (staples, hooks, swivels, turnbuckles, hinges), boat trailer, and the like.  

Recommended directions for use: make sure to shake the can before use. Spray at the distance of 8-12 inches from the surface. After application on the surface, let the nanocoating rest for 10 minutes. If necessary, remove any excess spray. Wait for 24 hours to get the best protection.

Consumption: one can for 22 square feet. It is recommended to apply at a temperature range from – 4°F to +95°F.

anchor
anchor roller
snatch block
steel rigging
metal cables
flanges and all threaded connections
boat ladders
hatches
propeller
Warning: Keep out of reach of children. Read label cautions carefully. Follow label directions to avoid injury. Use with adequate ventilation. Do not use in confined areas. Intentional misuse by deliberately concentrating and inhaling the contents of this product may be harmful or fatal. Keep away from heat, sparks, or open flames. Wash hands thoroughly after each use. Do not smoke while using. Avoid contact with skin and eyes. Avoid breathing vapor or mist. Get medical advice/attention if you feel unwell. Do not puncture container. Do not expose to temperatures above 120°F as container may vent, rupture, or burst. Do not puncture or incinerate container. Do not store in direct sunlight. Store in cool, dry, well-ventilated area away from incompatible materials. Dispose of contents and container in accordance with local, state and federal regulations.
images:

WHAT OURCUSTOMER SAYS

We want to know your opinion about our product.

Write a review